RHEL 5.5 server has most devices listed as "Unknown Device"

durron597 asked:

When I run lspci on my RHEL 5.5 Server (HP ProLiant DL360p Gen8), most items look like this:

00:03.3 PCI bridge: Intel Corporation Unknown device 3c0b (rev 07)
00:04.0 System peripheral: Intel Corporation Unknown device 3c20 (rev 07)
.. snip ..
03:00.0 Ethernet controller: Broadcom Corporation Unknown device 1657 (rev 01)

etc. of the 63 entries, 57 of them say Unknown device. Note: I am not the person who originally purchased or set up this server, I am simply the person who has inherited it. The prior adminstrator was fired (you know how that goes).

The server seems to be working fine, but I am planning to update to Centos 6.4 soon and I want to make sure I know the right hardware configuration.

Using kudzu and and The PCI ID repository I was able to figure out what most of the devices are; however, I was not able to locate the drivers for these devices. I would think that most of them would be compiled into the Kernel?

Here are some examples of things I discovered:

Intel Corporation Unknown device 1d00 (rev 05) <---> C600/X79 series chipset 4-Port SATA IDE Controller
Intel Corporation Unknown devices 3c02  <---> Xeon E5/Core i7 IIO PCI Express Root Port 1a
Intel Corporation Unknown devices 3c20  <---> Xeon E5/Core i7 DMA Channel 0
Hewlett-Packard Company Unknown device 323b <---> Compaq Smart Array Gen8 RAID Controller

However, my attempts to find real drivers (that don’t say Unknown Device) have failed. I tried intel’s website, HP’s website, Red Hat and CentOS RPM mirrors, typing the names of these hardware identifiers into Google… all to no avail.

My questions:

  1. Now that I know what these devices actually are, does it actually matter if I have the perfect drivers if nothing seems to be broken?
    • I don’t know how to use kudzu very well. I was able to figure out to use kudzu -s -p but I want to be extra cautious I don’t break anything.
  2. What about when I do the OS reinstall, should I attempt to have the correct RPMs handy (if I can find them?) Or should the installation DVD know what to do and I don’t have to worry about it?

My answer:


You’re running an old OS on new hardware.

Since you have an old release of RHEL, you have an old version of the PCI ID database which is used to look up device IDs and give textual descriptions for them. And since it’s old, it can’t possibly have descriptions for hardware that didn’t exist when it was created (since time travel does not yet exist).

This is not really an issue you need to worry about if you are updating to 6.4. It will have the latest PCI IDs and kernel drivers for any significant piece of hardware in that system. Anything that it might not have, such as HP management agents, you can obtain from HP.


View the full question and answer on Server Fault.

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License.